i have a 2004 ranger 4x4 and i have it grooved and iam only getting like 20mpg thats good but iam always looking for more right ..
i hear you can mess with the 02 sensor and get more just wondering if any one has tryed it and wut kind of gain did you have thanks alot matt
I get the same thing from people, even when the results are right there in front of them.
This weekend, I was at a Hydro Race, I live stream the event and use the generator for power.
On my other thread I describe in detail but the short story is that it is a 3KW generator, 4 gallon gas tank. I purchased 5 gallons fuel for the weekend.
Saturday, I filled the tank and ran it from 10am to 6pm. Sunday, I ran the generator from 9am to 3pm.
Doing the math that is 14 hours of run time on a generator that per manufacturer spec will only run 9 hours. Through personal experience with this generator pre-groove I could only get 6 hours out of a 4 gallon tank.
The guy next to me watching the races... looking for any "logical" reason for it to get those results, other than the groove.
You will all hear the following from me on a regular basis until you are all following my lead.
Now, you are all doing the paperwork, aren't you? I've gone to great lengths to give you guys everything you need to be successful, but most aren't using the tools! Here's the biggest failure of all...
1) Keep copies of the
Modification Report Form
on hand (Under the
) and fill one out for every mod you do.
2) Make SURE you have the customer SIGN it, explaining this is all experimental. this helps cut down on refunds dramatically!
3) Take that data every week (Sundays might be good) and fill out the
G-Man Modification Report
on the site.
Don't worry about having all the data. Just report what you have! For updates, like mileage reports months or years later, we'll handle that when it comes in.
You do this and you are helping everyone on this planet, most especially yourself and everyone else in Gadgetman Land!
So, KICK IN and get that data recorded! The world depends on you...