TOPIC: Harry Junker's 2000 F-150 unleashes power!!!

It is January 13th and Harry Junker brought his 2000F-150 5.4 triton to be grooved

These F-150's are a blast to do.

I built up backside of throttle body a little top make sure I did not cut through with the groove.

The temps were astounding to say the least how they dropped.

Exhaust manifold temp before 390 degrees, after 280 degrees!!!!

Water temp before 200 degrees, after 175 degrees!!!

Catalytic converter before 392 degrees, after 210 degrees!!!!

Tailpipe 160 before, 115 degrees after!!!!!

This pickup was interesting, It had the numbers 7700 which meant it was a built for a government operation.

It has 1 3/4 ton suspension on a 1/2 ton pickup so it was much heavier than a normal F-150.

Throttle response was tremendous and the brakes worked even better also.

Looking forward to mileage report.

GadgetmanNebraska