Welcome, Guest
Username: Password:
  • Page:
  • 1

TOPIC: Grooved/Nano-coiled Craftsman mower update

Grooved/Nano-coiled Craftsman mower update 30 Apr 2017 20:22 #1

  • Tracy Gallaway
  • Offline
  • Founder
  • Founder
  • Posts: 1881
  • Karma: 178
  • Thank you received: 564
So here's my update on my Craftsman Mower. It's both Grooved, and has the copper nano-coated coil in the spark plug/ magneto coil wire junction.

I gave 3 pushes on the priming button. It fired up instantly on first pull, no starting fluid. Once again, no smelly exhaust fumes. I mowed the section of backyard where the weeds grow again. Mower height one notch from lowest to scalp the weeds. And again, the mower tolerated the higher blade loads from scalping so low. It did stall once in tall grass/weeds.

In the past, I would have to spray the air filter w/ a shot of carb cleaner or starting fluid. And it often took several yanks on the starter cord. And it would not support a blade load so well.

Now I know that the copper nano-coated K-coil, as I call it, has made an improvement for sure.

As I came out to get a shot or two of the results, my neighbor's rat terrier Reno came out to see. He gave it a once-over and gave his approval. If Reno likes the results, it's good!:lol:

Tracy G
Tracy Gallaway
Founder and Constant Aide to Gadgetman
Gadgetman Reno, NV

Please Log in to join the conversation.

  • Page:
  • 1
Powered by Kunena Forum