TOPIC: New to the forum

Hello All,

Just wanted to say hello...

I was just recently introduced to the Gadgetman Groove two weeks ago at the 2012 Bedini/Lindemann Conference. I was so impressed with what Ron presented that I decided to buy the Personal License. Unfortunately, I have still not had any time to do the mod since I have been out of town every weekend since my return and will be out of town again this weekend. I hope to try it real soon and will report my finding when time permits. It doesn't help that work gets in the way as well!


Many thanks, Brent

Hi Brent,

Welcome aboard, as it has been recommended many times, make every attempt to review the many posts that have been submitted on the different topics.

There are also Youtube video's addressing specific items and the documents section of this site.

Also, before you cut take some time getting the details of your vehicle,
post the make, model, TB type, engine info and pictures (.JPG work well).

The more you put on this forum about your vehicle that we can comment on the greater your ability to groove your vehicle and make the other adjustments related to optimizing the effects.

If you have a question, put it on the forum and we'll toss it around for ya.

Karl Fortner
Tacoma, Washington

Hello Brent, Welcome to Gadgetman Land!

I second what Karl Fortner says. Take some time, look around the site. Tell us about your vehicle(s). Ask questions freely. One tip that worked for me was that I practiced Grooving on an old carb. base then a couple of cheap junkyard throttle bodies before I did one for "real".


We're a freindly group, there is a lot of accumulated knowledge here! We stand ready to help and learn with you. Have Fun!


Welcome to Gadgetman Land!

TracyG Gadgetman Reno

Hello Brent, I would like to welcome you to Gadgetmanland.

This is Aron Cheek, Gadgetmannebraska and I am very excited to see more newbies here on

the forums.

As everyone is saying, please browse the forums. A lot of info and results are here.

This is an exciting technology with great potential.

I have done more than 80 grooves with some amazing results.

I would like to thank you for your interest in the Gadgetmangroove process.

Also if you have any questions feel free to call me @ 402-719-7064.

Again, welcome and have fun grooving.

Aron Cheek GadgetmanNebraska

Hello Brent!

Welcome aboard! As Ron probably told you, we are a family. The key to this family is COMMUNICATION! Please not only communicate but get as much engine information before and after your modifications. This will help you greatly and help all of us troubleshoot things.

Again, welcome!

Scott Castleberg
Pellston, MI
Gadgetman Michigan